Day: September 4, 2019

Incinerator Technical Specifications Parameter Description Property CHIMNEY – Standard top type – Self supporting PERFORMANCE Temperature Not less than 11000C Capacity (kg/hr.) 10 Waste type  paper, clothing, packaging, rags, pallets, polythene and others Air pollution Standard The Environment Conservation Rules, 1997 DIMENSIONS Height(mm) 2256 Length (mm) 725 Width (mm) 725 Door opening 490×390 mm Chamber volume(m3) 0.5 Stack diameter(mm) 200 Grate/Hearth area(m2) 0.4 MATERIALS Casing 3.0mm & 4.5mm mild steel Loading Door High grade cast iron Grate/Hearth support Heavy mild steel plate lined with cast able refractory and insulation Ashing door High grade cast iron Insulation wall High temperature insulation bricks Refractory High alumina monolithic Air supply Natural Firing system Free burning or diesel/Oil/NG for non-combustible product Painting Casting Hammerite deep green Roof Hammerite silver grey Stack-mild Steel Hammerite silver grey […]
The incinerator should be a modern waste disposal unit, designed to burn medical waste in a clean and environmentally efficient manner. It should employ a temperature based logic control system to provide optimum control of the operating conditions and incorporate a high capacity thermal oxidizing secondary chamber. It should be designed to retain the exhaust gases, for at least 2 seconds to ensure the units effective destruction of the combustion products. Waste type Healthcare waste Waste density 125 to 350kg/M³ Waste calorific value 4000KCAl/Kg Moisture content  10-25% Estimated ash residue 5-10% Nominal capacity 50Kg/hour batch load Secondary chamber 2 seconds @ 850° c Primary combustion The primary combustion chamber is the main structure f the incinerator, fabricated from mild steel plate and stiffened with rolled steel sections. it is carried from the floor level on a substantial steel support frame. Internally the shell is lined with calcium silicate insulation and a hot face combination of super duty brick work or strength cast able. The primary combustion chamber must ensure minimum exit temperature is not less than 850°c One manual load incinerator comprising : Manual loading door Horizontal solid hearth, refractory lined primary combustion chamber. Approximate dimensions 800mm diameter x 2100mm long Full sized bulk load /ash removal door 1 off diesel –fired igniter burner –temperature controlled  1 off combustion air supply fan and distribution system ,automatic control High capacity secondary chamber with residence time not less than 2 seconds @>850°c 1 off diesel fired afterburner –temperature controlled Control panel –automatic operation Temperature indication primary and secondary chambers Refractory lined flanged chimney to a height of 10M above ground level NOTE: The secondary combustion chamber must ensure that the gas temperature as measured against the inside wall in the secondary chamber & not in the flame zone, is not less than 1100°c. Throughput 5okg /hour at a nominal caloric value of 4000kcal/kg and an average bulk density of 120kg/M³ for health care waste Ash
Recent Posts