An incinerator for food waste and also polythene waste management

Burners temperature level regulated (TIC– Thermocouple) and deal with ON–.
MELTING AT ABOUT 150/165 -200 IN 60MINS
7. Total room need: 9 m (L) X 8 m (W) X 6 m (H) Each unit
/ or alarms for efficient and risk-free procedure of the system.
According to our needs we would like the YD 15C miniature incineration.Mixed Biomedical waste Incinerator.Contract length: To be made a determination by the provider
II i. 1 No. Fully automated gas Oil burner for main room.
Opening up in addition to technique of operation of the incineration. We’ve really mentioned.
IX. Smokeshaft of 2.5 Mtr elevation.

Please confirm your determination to do this contract job by sending out pamphlet and your price quote for the below spec to allow us submit it into the company incharge of the contract due to their study along with acceptance.

Kind Of Waste: Mixed Biomedical waste.THE INCINERATOR AS REQUESTED BY OUR CLIENT SHALL BE SEMI AUTOMATIC WITH:
waste. The gas use also is dependent upon the frequency of the doorway.
ii. 1 No. Fully automatic Fuel Oil heater for additional chamber.
Burning air.

Eductor air.
VII. Oil storage tank of 1000 ltrs capability mounted on the skid.
6. Connected electric lots: Approximate. 7-8 KW (A/C 3 stage,220 V, 50 Hz).
VIII. Running tools and takes on comprising – rake, hoe, shovel (I No. each).
5. Anticipated fuel intake: 30-35 kgs/hr **( depending upon overall
VI. Electric electric wiring of the device.
III. Centrifugal driven draft follower setting up complete with motor drive, duct and also.
Maintaining the entire system under adverse stress to stay clear of gases/ dust.
2. Mode of waste management: Autoloading– DFDV + Bucket elevator
THE BURNER SHALL USAGE DIESEL/OIL
. PRODUCTS FOR DISPOSAL: SHARP MEDICAL WASTES.

1. Waste burning ability of unit: 100-125 kgs/ individual resources.
Squander, wetness web content, calorific worth, etc and will differ from waste to.
approx. Anticipated fuel use figures.
Combination of the waste, dampness

The Incineration System comprises of:

I. Main Incinerator with.
A. Primary & & Additional Chamber Modules appropriately refractory lined, piped & & wired.
B. Container lift + DFDV device for autoloading and also Deashing.
device.
II i. 1 No. totally automated Gas Oil burner for primary chamber.
ii. 1 No. fully automatic Fuel Oil heater for additional chamber.
III. Centrifugal forced draft follower setting up complete with motor drive, duct and also.
dampers, and so on installed on the typical skid of the device to offer:.
Burning air.

Eductor air.
IV. Eductor Setting up for:.
Air conditioning of exhaust gases from 900– 1000 0 C to around 350 0 C.
Maintaining the entire system under adverse stress to stay clear of hot gases/ dust.
bits rushing out of billing door.
V. Electric Control Panel together with safety and securities, and also Sound/ Visual.
signs and.
/ or alarms for efficient and also risk-free procedure of the system.
VI. Electric electrical wiring of the device.
VII. Oil storage tank of 1000 ltrs ability mounted on the skid.
VIII. Operating tools and takes on consisting of– rake, hoe, shovel (I No. each).
IX. Smokeshaft of 2.5 Mtr elevation.

Categories:

Recent Posts