animal incinerator manufacturer

Spare part list- ignition burner

Thing description                                                No of required

Motor     2

Control box  2

Pump couplings   4

Photo cells    2

Sets ht.

Sets electrodes    4

Oil valve       1

Nozzle   two


Parameter Compliance

Sort of Waste To take care of medical waste, categories A,B,C,D,E

Type of Incinerator Pyrolytic

Nominal Burn rate 50 t0 60 kg/ hr in 3500Kcal/Kg

Loading Manual, Batch Load

De  Ashing Automatic or Manual batch de ashing

The incineration should prevent the discharge of black smoke and nice dust throughout the loading

Main chamber ability 2-3 m³

The insulating material of the combustion chamber ought to be made up of refractory bricks, obtaining a greater content of

aluminium and insulates,

The plate of combustion in carborundum avoiding the fixing of glass and slags

Hours of operation /Day >10 hrs

Max Operating Temperatures 1400 °C

Normal Operating Temperatures(Main )  >850 °C

Operating Temperature(Secondary) >1100 °C

It ought to have electronic temperatures regulator( Temperatures regulator in electronic watch)

Carbon content of ashes <2 percent

The setup should be wholly free of visible smoke as well as offensive odours

Residence time in 2nd chamber 2 second minimum

The internal diameter of the Chimney:Ø 400

Height of stack >8m

Burner operation Automatic On/Off

Fuel Diesel

Gas consumption in raed capacity >7kg squander /ltr

Electricity consumption <2kW at rated capacity

Operating Voltage 220 — 240V AC 50Hz

Spare parts Provide for 1 year lent as alternative

Consumables Supply for 1 year of operation to be mentioned as alternative

Warranty Parts and service support: 1 year minimum article comissioning

Service support <72 hours

Emission standard Compliance BS3316 or equivqlent standard

Procedure filtering system Scruber to be mentioned as alternative

CE Manufacturing Compliance BS EN 746-2-1997

Design Specification Type A,B,C,D,and E of medical waste

Setup and Comissioning  Included in condition of supply

Training in preventive and curative maintenance and use of the incineration Operator training inclusive in provide

Capacity to cure Plastic less than 40% by weight