Burner type of pyrolytic clinical waste burner capacity

– A receiving cage for biomedical waste;

– A combustion room with a chimney with a filter to retain the ash;

Chimney segment: approximately 300 cm; With a minimum height of 6 m

Door dimensions: roughly 50×60 cm

Supplied with a 500 liters gas tank and all required accessories for setup.
Refractory

Fireplace: 4 to 6 meters ;
Temperature of more than 1100 ° C + obtained;
(adsbygoogle = window.adsbygoogle || []).push({});
The mark to be given
Capacity: 20-50 kg / hour

Including:Incinerator: Structure to be given {
(adsbygoogle = window.adsbygoogle || []).push({});|}
–                          INCINERATOR for pharmaceutical waste therapy using a scrubbing system

Together with the following technical data:

1.      One pharma solid waste incineration unit comprising two combustion chambers and based on steel base with scrubbing

system.

2.      Working hour day: minimum 10 hours/day. Capacity: Approximated 150 kg/hr. Over 10 hrs. Wastes features:

·         BULK density: 70 — 100 kg/ bm³.

·         Calorific value: 2000-3000 kcal / hr.

·         Moisture content: 20-30%by weight.

·         Ash content: two — 8 percent by weight.

·         Vinyl content: 15-20 % by weight.

5.      Two combustion chambers.

6.      Operating temperatures:

·         First room: not less than 700 – 800 °c.

·         Second room: not less than 1200 °c (during continuous operation).

7.      The burners should be automatically switched off if some of the combustion chambers is open.

8.      The burners of the first and second combustion chambers are chosen for burning diesel oil (light fuel).

9.      Automatic loader and unloader to be provided.

10.     Exhaust gases to be comply with International Environmental code and requirements.

Height: 1.10 meters

Including:Incinerator: Structure to be given {
(adsbygoogle = window.adsbygoogle || []).push({});|}
–                          INCINERATOR for pharmaceutical waste therapy using a scrubbing system