· Two completely automatic, oil fired, pressure jet burners
· Panel plank
· Diesel tank of power 250 It. With 2 petrol pipelines, filter and valve.
A cage for receipt of biomedical waste;
Door opening
Stainless steel chimney, 3.5 meters above the incineration.
A turbine letting the source of the atmosphere.
Residency time in second room 2.0 seconds
Height such as flue 3500mm
Front door for loading and unloading.
(primary chamber)
300 liter gas tank
A combustion room with fireplace with a filter to keep ashes;
Plant burning speed – 100kg/hr
Fuel – Diesel oil – 35 sec Redwood
Overall measurements are as follows:
Width 2261mm
Length 3264mm
Chimney Diameter – 390mm
Chimney Height – 8000mm
Max. Operating temperature 13200C
An air source;
Type: for creatures waste
Length 2000mm
Recommended Spare list
In a very simple design with a metallic steel drum electrical. Including:
Operation
GLP Gas
Capacity: 30 kg daily for a maximum loading of 120 kg.
Ave Capacity 50 kg per hour
Chinese incineration manufacturersWe process 8-10 ton waste of sheep carcass and its byproduct daily. We’re looking for the gear: combustion burners(combined gas distribution:natural gas and diesel),control panel and filtration system. The width of the incineration is 20 cm. Lower calorific power of this waste is 4KW/KG. Heating power 4000KW
Chimney Diameter – 390mm
Chimney Height – 8000mm
chinese incineration manufacturers, We process 8-10 ton waste of sheep carcass and its byproduct per day. We are looking for the equipment: combustion burners(combined fuel supply:natural gas and diesel),control panel and filter system. The diameter of the incineration is 20 cm. Lower calorific power of the waste is 4KW/KG. Heating power 4000KW