HIGH TECH PYROLYTIC MEDICAL WASTE HEATER

20.
* The insulating material of the burning space has to be made up of refractory bricks,.
Using “PYROLYTIC” combustion ought to have:.
Possessing a high material of aluminum and additionally protects obstructs so as to make certain a minimum.
* A button breaker to get every single motor (heaters and ventilators).
* A heater of burning of gases,.
* A timer with flexible temporization for the coverage of every heating apparatus.
Temperature level exterior sheet steel.

13.
> > Thickness: > > 75 mm.
* Plate of burning Carborundum, avoiding the dealing with glass together with slags. A room of write-up burning of gases.
Accomplished by valves together with adhering to the constraint of the automated cycle. Controls together with guidelines:.
Personal facilities, laboratory, institutes, etc……… ….
* A heating system of lighting that the use is limited to the ignition of waste.
* A sheath of draining of the gases charred.
6. The burner needs to protect against the launch of black smoke in addition to fine dust, (Electric) during the.
2. It requires to have the capability to run very bit less than 10 hours/day
Manufacturing facility; it will consist of medical together with preventative maintenance, and also using tools, etc

NB.; Civil tasks in addition to any kind of other pertinent options for the installation together with training of drivers require to be contained in the heater’s rate.

Requires for the refuge of the burner:

Residence of the incineration thorough in offer (your residence must have bathroom in addition to hand cleaning facilities in addition to similarly firefighting). The measurement of the shelter shall gauge 4 meter by 6 meter and will be given with appropriate air ventilation.

This material together with equipment should comprise in the shed of the heater: structure in debris stone, isolation roof covering versus humudity; elevation with block of 20 centimeters (bloc concrete), proceeding lintel (linteau) in reinforced concrete; steel framework (charpente en steel); roof covering sheet B.C.A. 28 BG

23. Release Requirement Compliance: BS 3316 or similar standard

23. Capability to treat Plastic: Not much less than 40 percent by weight

– – Shield in fibrous panel:.
Flame, lighting in addition to likewise safety and safety and safety of digital ignition, irreversible air flow, electro-magnetic sluice.
Tons.
>> Nature: 65% of A1203.
* Electro-ventilator dispersing the extra air, the standard of the air flow being.
* Length of the refractory;.
* A gadget of air ducts of cooling of waste gases,.
9. The incineration must be fully lacking observable smoke together with annoying odours.
shutoff.
* A gadget of shot air allowing a entire recombustion of gases,.
Packing shielding out of refractor. -.
* Electric box. The p – ashing has to be done in lowest level of the burning chamber or the deashing.
* Frontage of filling door seals improved on hinges, wheel of screw plug, flexible joint, in addition to also.
* Heating with gas, mono-bloc dispersing guiding kind with directly fire, lighting in addition to also security of.
– Safeguard in primitive panels:.

ADVANCED PYROLYTIC MEDICAL WASTE BURNER

1. Skill of damages in weight: 60 Kg/h.
* Flawlessly tight door to the hand-operated loading of waste. The filling should be Manual, Establish.
Electronic ignition, long-term ventilation, electromagnetic sluice entryway of principle and also dividing.
Control box watertight to grime, including:.
burner. The setup burner has to birth a 1 year warranty.
17. A burning chamber of waste:.
> > Thickness: > > 150 mm.
11. The Internal size of the Smokeshaft: Ø 400 as well because of its altitude: 8 m.
3. {
(adsbygoogle = window.adsbygoogle || []).push({});|}
* Length of the refractory;
7. It ought to be able to reduce the quantity of wastes by 98%.
Improve Filtering system: Scruber to be mentionned as discretionary

23. Release Criteria Conformity: BS 3316 or similar standard

23. Capability to deal with Plastic: Not much less than 40 percent by weight

24.
– The Temperature degrees of combustion: Minimum will be 850 ° C in addition to similarly max 1400 ° C. – – Message combustion: > > 1100 ° C.
> > Nature: Calcium silicate. * Heating system of lighting of waste, together with gas, conventional mono-bloc dispersing leading plunging.
– > > Nature: 42 percent of A1203.
14. Heating system process need to be Automatic On/Off.
15. Fuel: gas.
Gateway of regulation in addition to separating valve.
> > Thickness: > > 100 mm”.
loadings.
12. The number of the combustion room: 1.200 L.
4. Layout Specification: Types A, B, C, vitamin D, along with E of medical waste.
* Carcass in solid sheet steel with aid of connection.{
(adsbygoogle = window.adsbygoogle || []).push({});|}
The provider will surely perforn an onsite installation of the heater. |* Carcass in solid sheet steel with aid of connection.
loadings.
Accomplished by valves together with adhering to the constraint of the automated cycle. Controls together with guidelines:.
> > Thickness: > > 150 mm.

ADVANCED PYROLYTIC MEDICAL WASTE BURNER

1. Skill of damages in weight: 60 Kg/h.
* A sheath of draining of the gases charred.
> > Thickness: > > 100 mm”.
7. It ought to be able to reduce the quantity of wastes by 98%.
* Frontage of filling door seals improved on hinges, wheel of screw plug, flexible joint, in addition to also.
>> Nature: 65% of A1203.
* A heating system of lighting that the use is limited to the ignition of waste.
9. The incineration must be fully lacking observable smoke together with annoying odours.
Personal facilities, laboratory, institutes, etc……… ….
shutoff.
6. The burner needs to protect against the launch of black smoke in addition to fine dust, (Electric) during the.
* A timer with flexible temporization for the coverage of every heating apparatus.
* Length of the refractory;.
>> Thickness: > > 85 mm.
* Heating with gas, mono-bloc dispersing guiding kind with directly fire, lighting in addition to also security of.
The provider will surely perforn an onsite installation of the heater.
– Safeguard in primitive panels:.
Packing shielding out of refractor. -.
12. The number of the combustion room: 1.200 L.
4. Layout Specification: Types A, B, C, vitamin D, along with E of medical waste.
* Length of the refractory;
* Electric box. The p – ashing has to be done in lowest level of the burning chamber or the deashing.
Tons.
– – Shield in fibrous panel:.
16. The provider needs to offer needed details to your absolute best of the installation This incineration.
– The Temperature degrees of combustion: Minimum will be 850 ° C in addition to similarly max 1400 ° C. – – Message combustion: > > 1100 ° C.
5. PYROLYTIC” burning, by handling the gasification of waste.
* A regulator with watch to your temperature level of combustion.
Gateway of regulation in addition to separating valve.
– > > Nature: 42 percent of A1203.{
(adsbygoogle = window.adsbygoogle || []).push({});|}
Manufacturing facility; it will consist of medical together with preventative maintenance, and also using tools, etc

NB.; Civil tasks in addition to any kind of other pertinent options for the installation together with training of drivers require to be contained in the heater’s rate.

Requires for the refuge of the burner:

Residence of the incineration thorough in offer (your residence must have bathroom in addition to hand cleaning facilities in addition to similarly firefighting). The measurement of the shelter shall gauge 4 meter by 6 meter and will be given with appropriate air ventilation.