Incinerator for hospital waste management

Incinerator for hospital waste management with these attributes:

• In high temperatures (pyrolytic incineration 2 chambers with temperatures ranging from 950 º C to 1320 º C;

• Ability to destruction of 400 to 600kg per hour

• Capable of destroying microorganisms;

• Drain ash;

• Drain glass and needle crusher;

• Porch with tap water to hand washing and decontamination;

• Observe the dilemma of environmental quality standards, emissions eloquent and regulation on the dilemma of waste;install big incineration to one of the biggest veterinary clinic in KSA so in the event that you will support us with a single unit (big incineration) and environmental with onsite training, the capacity for the device is 2000 Kg for cattle, horses and farm animals also suitable to each of animal waste types, we want it diesel fired. OES-Industrial MultiWaste Incinerator System (Solid/Liquid)

Scope of the Work:
Low running and maintenance costs
Wide door for ash removal
f). Liquid ink waste/acidic residue
y). Contaminated plastics/resin wastes.
Producing ash and Gaseous fumes which are medicated using cyclone type wet scrubber and caustic scrubber to produce air with pollutants at the permitted range and non-toxic ash mainly inorganic salts.

Incinerator utilities
l). ETA,MEA squander
a). Bio medical waste/pharmaceutical squander
Dense refractory concrete lining rated at 1600 C
The dual stage incineration helps you to burn the waste in 2 phases, first in a medium temperature of 870- 900 Deg C along with the second stage at 1200 deg C
Metallic seal arrangement with ceramic insulation to avoid heat  radiation and also control radiant temperature
Optional Stainless Steel Casing
Afterburner Preheat
1st chamber-870 Deg.C – 900 Deg.C
k). mono ethanolamine
Incinerator should have following criteria:
e). organic chemical waste
C ). liquid chemical waste
m). Wastes after treatment of compounds in etp plantlife.
r). Slurry/adhesive/grease/powder coating wastes.
Ability: 315 KG/HOUR SOLID WASTE/ / OR 200 LITRES/HOUR LIQUID WASTE (with dual chamber system)
s). Semi strong liquid chemical waste
x). used cotton rags
Heat recovery alternative

Incinerator utilities
Incinerator should have following criteria:
Metallic seal structure with ceramic insulation to avoid heat  radiation and control radiant temperature
Advanced gas treatment system to avoid emission of toxic gases (scrubbing system).
Low consumption high efficiency compact automatic burning system.
Low running and maintenance costs
Fully automatic and simple to operate control panel
Afterburner Preheat
Dense refractory concrete lining rated at 1600 C
Solid Hearth to allow maximum Burnout
Large Top opening lid for easy loading
Wide door for ash removal
Optional Stainless Steel Casing
Heat recovery option


Recent Posts