Incinerator for medical facility waste Observation

Burner for health care facility waste monitoring with the adhering to features:

– In large temperatures (pyrolytic burner 2 chambers with temperatures ranging from 950 º C to 1320 º C;

– Capacity to damage of 400 to 600kg a hr;

– efficient in ruining germs;

– Drain ash;

– Drain needle in addition to glass crusher;

– Patio with tap water for hand cleaning and decontamination;

– Observe the issue of environmental high quality criteria, sparks fluent in addition to coverage on the problem of waste; bracket large incineration to one of the largest veterinary health centre in KSA so in the event that you will surely support us with one system (large incineration) and ecological with onsite training, the capacity for the device is 2000 Kg for cattle, equines and additionally farm animals additionally suitable to all animal waste kinds, we need it diesel fired. OES-Industrial MultiWaste Incinerator System (Solid/Liquid)

Extent of this Job:
x). Used cotton cloths.
p).

Resources Of The Wastes.
The following types of wastes can be dealt with by using incineration.
a). biography medical waste/pharmaceutical waste.
b). strong chemical waste/textile markets waste.
c). liquid chemical waste.
d). dyes as well as intermediate waste.
e). natural chemical waste.
f). liquid ink waste/acidic deposit.
g). insecticides/herbicides/pesticides.
h). fungicide waste.
i). ethanolamine.
j). amino ethanol.
k). mono ethanolamine.
l). ETA, MEA waste.
m). wastes after treatment of chemicals in etp plant.
n). blended alcohol waste water.
o). alcoholic waste.
p). farming liquid chemical waste.
q). sludge mix liquid.
r). slurry/adhesive/grease/ powder finish wastes.
s). semi strong liquid chemical waste.
t). bulk completely dry chemical waste.
u). pharma chemical wastes.
v). solvent chemicals/paint wastes/used glass grains.
w). utilized tires.
x). used cotton cloths.
y). contaminated plastics/resin wastes.
Range of Work:.
Incinerate all types of liquid/solid hazardous/chemical/non contaminateds materials avaliable in the industries with appropriate scrubbing up system with common emission rates.
The twin stage incineration aids to burn the waste in 2 stages, initially at a medium temperature of 870- 900 Deg C and also the 2nd stage at 1200 deg C.
Producing ash as well as Aeriform fumes which are treated with cyclone type damp scrubber as well as caustic scrubber to generate air with contaminants in the allowed variety as well as Non dangerous ash mainly not natural salts.

Incinerator utilities.
Burner should have complying with requirements:.
Metallic seal framework with ceramic insulation to stay clear of warm radiation and also control glowing temperature level.
Advanced gas treatment system to avoid emission of hazardous gases (rubbing system).
Reduced intake high performance compact automated burning system.
Low running and upkeep prices.
Fully automatic and also easy to operate control board.
Afterburner Preheat.
Thick refractory concrete lining ranked at 1600 C.
Solid Hearth to enable maximum Fatigue.
Large Leading opening cover for simple loading.
Wide door for ash removal.
Optional Stainless Steel Case.
Warmth recovery option

Categories:

Recent Posts