incinerator manufacturer china

 

 

A air compressor complete with a receiver shall be included from the incineration. Both compressor and receiver shall be

mounted on precisely the exact same slide as the incineration.

 

 

The incineration shall also provide digital mimic window for tracking of the feed speed of the sludge pumps as well as

the feed speed of DO being used. Digital monitoring of the flue gas temperature shall also be provided. The digital

display shall have the ability to display alarms and faults. It shall be equipped with appropriate control keys that allow

scrolling in the alerts, changing set points, viewing data, admitting and alert to the alarms and faults.

 

 

An exhaust stack shall be provided which shall discharge its flue to the atmosphere. The stack shall be at least 15 m

high and shall be fit to operate in marine and corrosive environments. The offered stack shall be of heavy duty design,

inclusive of flexible compensators, bellows, transition piece and shall be built to withstand highly corrosive

surroundings, high cyclic pressures and capable of resisting Allergic gusts of at least 280 km/hour.

 

 

The incineration body shall be of dual casing type, in other words, air cooled. The incineration shall also operate on a

negative draught that’s maintained by means of an ejector so as to stop smoke and gases from leaking to the

surrounding region. Air for combustion shall be supplied in surplus so as to enable complete combustion of sludge.

negative draught that is maintained by means of an ejector so as to prevent gases and smoke from leaking to the

surrounding area. Air for combustion shall be supplied in excess so as to enable complete combustion of sludge.

Categories:

Recent Posts