Incinerator type of pyrolytic medical waste incinerator capability

Including:Incinerator: Structure to be Given

– A receiving cage for biomedical waste;

– A combustion room with a chimney with a filter to retain the ash;

Chimney segment: approximately 300 cm; With a minimum height of 6 m

Door dimensions: approximately 50×60 cm

Supplied with a 500 liters fuel tank and all required accessories for setup.
Ability: 4 to 6 meters ;
–                          INCINERATOR for pharmaceutical waste therapy with                  a scrubbing system

Together with the following technical information:

1.      1 pharma solid waste incineration unit comprising two combustion chambers and based on steel base with scrubbing

system.

2.      Working hour day: minimum 10 hours/day. Ability: Approximated 150 kg/hr. Over 10 hrs.

4.      Wastes features:

·         BULK density: 70 — 100 pound / bm³.

·         Calorific value: 2000-3000 kcal / hr.

·         Moisture content: 20-30%by weight.

·         Ash content: two — 8% by weight.

·         Plastic content: 15-20 percent by weight.

5.      Two heating chambers.

6.      Operating temperatures:

·         First room: less than 700 – 800 °c.

·         Second room: less than 1200 °c (during steady operation).

7.      The burners should be automatically switched off if any of these combustion chambers doors is open.

8.      The burners of the first and second combustion chambers are selected for burning gas oil (light fuel).

9.      Automated loader and unloader to be provided.

10.     Exhaust gases to be comply with International Environmental code and requirements.

Categories:

Recent Posts