Laboratory incinerator china manufacturer

Solid waste to be incinerated

 

 

Cartons,  rags,  cotton  and  other  wastes  associated  with  production of power packed from the incineration in

bags.

Loading capacity: At least 100 Kg / h

 

 

Start up fuel

 

 

Diesel Oil

 

 

 

2.3  Incinerator Supply

 

 

The incineration shall be equipped with sludge pumps which allow homogenous flow of sludge to its burner. These pumps

will deliver waste oil from the incineration sludge mixing tank to the incineration. Operation and control of those

pumps shall be completely automatic. A linear negative feedback control algorithm will be used to adjust the feed rate of

the sludge pumps and thus change the number of sludge being incinerated. The sludge line will also be equipped with

appropriate self cleaning filter which will keep impurities away from the burner.

A  sludge  mixing  tank  equipped  with  a  superheated  water  heater  shall  also  be

provided. A Superheated water heater will be provided to heat the waste oil to the inlet temperature needed by the

incineration. If a superheated water heater

 

can’t be supplied, an electrical heater shall be provided to your tank. The tank will also be equipped with a magnetic

degree indicator, level switches and appropriate drain valves, independent flow and vent pipes.

 

 

Attributes of superheated water available in the powerhouse are as follows; Pressure and temperature of

superheated water in supply manifold; P = 10 Bars, T = 150 Deg

Pressure and temperature of superheated water in yield manifold; P = 8.5 Bars, T = 140 Deg

Categories:

Recent Posts