The publications listed below form a part of the specification to the extent referenced. The publications are referred to within the text by the basic designation only.
5Waste weighing equipment
6Wheeled 2.0m3 waste storage hoppers (amount to be decided by hospital managers)
7Incinerator loader
ASTM A53/A53M (2010) Standard Specification for Pipe,
SECTION 11 82 21 Page 6
U.S. GENERAL SERVICES ADMINISTRATION (GSA) UNDERWRITERS LABORATORIES (UL)
Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Gal annealed) by Hot-Dip Procedure FM GLOBAL (FM)
O Incinerator loader for loading hoppers or packs o Ash handling equipment
The incineration will function as controlled atmosphere kind, made for (6-8) hour-day surgeries and ranked at 75 mph. The incineration plant Includes the following:
3Continuous loading using hydraulic ram feeder o Burners and fuel system
ISA – INTERNATIONAL SOCIETY OF AUTOMATION (ISA)
High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardened
MEDICAL WASTE INCINERATORS for furnishing, installing, adjusting, and testing automatically controlled air medical waste incinerations with a capability to burn off 75 Kg/hour waste materials of behavioral and biological nature.
The process of incineration provides the advantage of volume decrease as well as the ability to eliminate familiar waste and sharps. On site incinerations supply a quick and effortless means of disposing medical waste. This really is the most widely accepted and feasible method of managing waste that is highly infectious.
o Controls and Instrumentation o Chimney and flue connections
o Pumps