System Capacity: 100 Kg/h
Type of Wave: Municipal Waste (Paper, Plastic, Wood etc.)
Waste Feeding Manual
Fuel: Natural Gas
Incinerator Type: Double Chamber
External Cladding: MS sheet of suitable gauge, painted with corrosion resistant paint
Fuel Gas Emission discharged to the atmosphere should meet Pakistan National Environment Quality Standards (NEQS)
User Friendly Operation should be ensured by proper automation.
Adequate safety features should incorporated to protect the premises and operators against mishaps and accident.
Primary Chamber:
Auto on/off Burner
Auto temperature control
Excess air blower fan.
Chamber constructed of two layer refractory lining.
Comprising: Thermal insulator lining & Refractory masonry lining, sufficient enough to maintain normal temperature at
outside.
Secondary Chamber:
Auto on/off Burner
Auto temperature control
Excess air blower fan.
The chamber constructed of two layers Refractory Lining.
Comprising: Thermal insulator lining & Refractory masonry lining, sufficient enough to maintain normal temperature at
outside.
Control Panel:
Standard PLC control panel
Note: All the instruments / controllers must be of high quality, preferably European / Japanese Origin.
Chimney / Stack:
Made of MS sheet, sufficiently insulated & lined with refractory bricks (where required) to maintain normal temperature at
outer surface.
Painted with high quality heat & corrosion resistant paint.
Note:
Provision of Electric Supply & Natural Gas up to incinerator required.
Motors of all blowers / fans / pumps must be of high quality, preferably European / Japanese origin.
Terms & Conditions:
Transportation required for installation point.
Installation & commissioning of the whole incinerator system required.
Necessary Civil Works / Shed, concrete platform for incinerator and construction of base / pads for stack (if required) are
also required.