pet cremation equipment

 

Method of Waste Charging

Waste shall be fed to the primary chamber manually, that is by hand. Semi-automatic or automatic feeding methods are

not required.

 

Method of Burning

The primary and secondary burners shall be equipped with at least one fuel oil burner each. Waste shall be fed

into main room and heated to required ignition temperature of at least 600 degree Celsius. A controlled amount of

air shall be confessed by combustion air compressor to keep up the essential reaction heat required for thermal degradation

of waste. Smoke, ashes, volatile gases, respectively created from the primary chamber will be economically and efficiently

ignited from the secondary room. Emission throughout the pile shall be within environmental standards.

 

Combustion Chambers

The internal lining for combustion chambers shall be made up of pre-determined thickness and higher temperature stability

insulation, higher power firebricks and castible refractory. The casing of the room shall be constructed from high grade light steel plate. Lifting devices

like eye bolts and lifting lugs will be fitted as standard.

The internal lining for combustion chambers shall be made up of pre-determined thickness and high temperature stability

insulation, high strength firebricks and castible refractory. The temperature rating for refractory shall be at least

1,500 degree Celsius. The casing of the chamber shall be constructed from high grade mild steel plate. Lifting devices

such as eye bolts and lifting lugs shall be fitted as standard.