professional waste heater

medical waste incineration: medical waste and general waste
Hearth area    1:36 aq.m
Capacity    20kg/hr
Alloy temperature sensor
Fuel Consumption: 10 litres/hr maximum
400 ° C silicone based paint finish
Especifica?? Es Gerais     6 millimeter plate steel sheel structure
Primary burner (petroleum )    420.00btu
Incineration fever: 950 – 1300 °c
Temperature controlled Burners
Hospital, medical, industrial and medical wastes by medical waste incineration procedure.
Warranty: 12 months
factory wired and tested
Ash 1 leftovers elimination: Automatic
Interlock switch on load doors
One secondary home @ 1000 ° C
Casing: thick (min 5 mm) stainless steel casing and fully
Electrical service    220/50
11cm 1400°C refractory Liner
Exhaust stack    46cm x 6m
Secondary burner (petroleum )    900,000 btu
Ash port height e    36x36cm
Doad port height e    60x60cm
Ash port height and    36x36cm
General Specifications    6mm plate steel sheel structure
Secondary combustion burners
Dimension “D”    152cm
Interlock switch on load doors
Alloy temperature sensor
One secondary home @ 1000°C
Electrical service     220/50
Exhaust stack    46cm x 6m
Hearth area    1.36 aq.m
separete ash door
Secondary Chamber    694L
Capacity    20kg/hr
Fuel: Diesel

Categories:

Recent Posts