Scientific waste incinerator up for sale

it’s taken from the floor covering level on a substantial steel support structure. Within the covering is lined with calcium silicate insulation as well as likewise a hot face mixture of exceptionally commitment brickwork or high stamina castable.

The main burning chamber should make sure minimal separation temperature level isn’t much less than 850? C.
Optimum score: a minimal of 450kW/hr.
Service/maintenance manual: 2 sets.
2nd chamber: 2 [e-mail       protected] C.
One Hand-operated Lots Burner making up:.
Common use: in the minimum 4.5 Ltrs/hr.
Limiting persistent solution limitation 1000? C.
Coaching: the Agent will perform a 2 days heaters training following installment and also selecting of those apparatus.

The Rep will certainly do a 2 days process & & & & maintenance training into the Biomedical design employees following installation & & & & appointing of the apparatus.

Normal intake: a minimal of 3Ltrs/hr.
Chamber: should be refractory lined to the listing under desire;.
Nominal capability: 50kg/hr put lots.
Thermal conductivity: 0.095 W/mk.

Waste kind: healthcare waste
Ash: The waste will be lowered by 90 ~ 95 percent to leave 10-5% ashes.
Refractory lined flanged chimney into an altitude of 10M above floor level.
Control panel– – automated treatment.
Electric distribution: solitary stage: 220/240VAC; 50/60Hz

Ignition heating components: entirely packaged oil kind, overall with electric ignition in addition to fire failing controls, wired with constant running follower as well as complete with shutoffs, fan as well as electric motor.
Straight strong fireplace, refractory lined primary burning space. Approximate.
Waste calorific well worth: 4000KCAL/kg
Maximum use: in the minimum 9Ltrs/hr.
1 off diesel-fired afterburner– – temperature controlled.
Chimney/Stack: Ought to be produced from refractory lined small steel or premium top quality air-cooled s/s.
Flue gas therapy: if have particle eliminator (scrubbers).
Heating unit: ordered for on/off therapy.
NB: The excess combustion chamber need to make sure that the gas temperature level as gauged versus the within wall in the 2nd chamber & & & & not in the fire area, is less than 1100? C


Recent Posts