Main chamber — Consists of a monolithic high grade refractory concrete using high grade insulation financing,. Utilising a refractory hearth or equivalent for constant ash removal.
Secondary Chamber — Consists of high density, low thermal mass refractory ceramic fiber with an innovative low emissivity protective coating. Bio medical waste treatment plant ( Incineration )using panel.
Rating Temperature 1600 — 1800 deg. C
Refractory Material Material * Alumina ( 56 — 80% Actual )
Heat Insulation Required for indoor installation
Delivery Karachi Sea Port – Pakistan
The details of Components of incineration is as follows:
Thickness 25″ minimum
1: Main Controlled Air
Feeding & Ash Removing System Air Tight ventilating locked doors ( Feeding from Top will be preferred)
Heating Source Natural Gas
Secondary Chamber Temperature * 1100 — 1300 deg. C
Away — Gas System Required
Main Chamber Temperature Required* 800 — 1000 deg C.
System Status & Alarms Required for all necessary parameters.
Insulation Material Ceramic Fiber
Secondary Chamber Temperature * 1100 – 1300 deg. C
Heating Source Natural Gas + Propane or Fuel Oil as an additional source
Off – Gas Residence Time 2 Seconds.
Refractory Material Material * Alumina ( 56 – 80 % Pure )
Lining * SS 316L
Life Span * 10 – 15 years.
Rating Temperature 1600 – 1800 deg. C
Media Slightly acidic
Insulation Material Ceramic Fiber
Thickness 25 “ minimum
Feeding & Ash Removing System Air Tight ventilating locked doors ( Feeding from Top will be preferred)
Spares Required for 5 Years trouble free operation