The particulars of Components of incineration is as follows:
Heat Insulation    Required for indoor setup
Temperature Monitoring    Required
Away — Gas Home Time     2 Minutes.
Dimensional Sketch, Operation & Installation Manuals.     Required
Heating Supply Natural Gas

Secondary Chamber    Temperature *    1100 — 1300 deg. C
Temperature Control to Primary & Secondary Chambers    Required
Burn Rate *    60 Kg / hr
1: Primary Controlled Air
Fittings & Accessories    Complete Package is required ( such as Nozzles & Flanges etc..)
Chambers *    Double Chamber.
Media    Slightly acidic
Away — Gas System    Required
Thickness    25″ minimal

Primary chamber — Consists of a monolithic high grade refractory concrete using high grade insulation backing,. Utilising a refractory hearth or equal for constant ash removal.

Secondary Chamber — Consists of high density, low thermal mass refractory ceramic fibre with an innovative low emissivity protective coating. Bio medical waste treatment plant ( Incineration )using panel.

SOLID WASTE INCINERATOR    Feeding Capacity:    200 to 220 Kg.
Feeding & Ash Removing     System    Air Tight ventilating locked doors ( Feeding out of Top will be preferred)
Life Span *    10 — 15 years.


Recent Posts