WASTE INCINERATOR TECHNICAL QUESTIONNAIRE

Burning capacity (kg/hour)
No. of chamber(s)
Wet scrubber (Yes/No)
Chimney (Yes/No)
Fuel (Gas/Diesel/Both)
Loading (Manual/Auto)
Primary chamber temp.
Secondary chamber temp.
Third chamber temp.
Warmup time

Chamber plate thickness
Chamber plate material
Chimney plate thickness
Chimney plate material
Chimney length
Chimney diameter
Gas consumption
Diesel consumption
Gas requirement (volume/pressure)
Diesel tank (Capacity)
Ambient requirement (Temp./Ventilation)
Dimension of eqpt. (WxLxH)
Reqd. room dimensions (WxLxH)
Flue emission temperature
O2/CO/CO2 and other gases in flue emission
“Water requirement (Yes/No)
If yes, specify details”
“Drain required (Yes/No)
If yes, please specify”
Insulation material
Insulation thickness
Max. continuous operating time per day (Hr)
Safety standards compliance of flue gas emissions (air + water) Yes/No, Pls specify
Specify wet scrubber drain treatment
Any material restriction for incineration like metal, glass, etc.
Refractory material
Refractory thickness
Power supply (Volt/Ph/Hz)
Electrical load 
Warranty period
Factory trained engineers available (Yes/No)
“Same model installed at other sites (Yes/No) 
If yes, please specify clients’ name”
Spare parts’ lead time
Loading chamber volume
Weight
Local display of process parameters via PLC  or controller (Yes/No)
Specify safeties in machine
Specify ash removal system
Hearth technology available
Share emission report of installed and running incinerator
Share wet scrubber drain water report if available
Is there any recommendation of scrubber drain  by regulatory body or can it be drained directly to city sewerage?

Categories:

Recent Posts