having waste from manufacturing procedure which is having quite fine/powder material with moisture of 40%. Will this system acceptable for this particular application. For electricity waste, proposal plus wet scrubber system.
Optional 1 segment type: Wet Cooling Spray Scrubber. Function: cooling, eliminate dust.
Optional 3 segment type: Wet Cooling Spray Scrubber+Wet Dust Scrubber+Fog and Water Separator. Function: cooling, eliminate dust, eliminate fog(from water). The exhaust temperature around 200℃.
If waste is Acidic material, add Caustic soda into the water and cost a litter higher than with no Caustic soda.
If plus wet scrubber, request build cooling pool(recirculating water) at local site. Recirculating water pool and Sludge sedimentation at bottom, wash Sludge regular.
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
2020-07-08
