an incinerator specifically designed to suit the need to incinerate medical waste at the point of source. This compact machine was designed due to the increased demand for hygienic on site medical waste incineration.
The MED RANGE has a number of common features: Virtually Smoke and odour free. Rapid warm up to operating temperature. Simple to use.
2 options are available to suit every application of
medical waste incineration ( type 4).


FEATURES
2 Options Available
5mm Steel Construction
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control
24hr Burner Exchange Service

Model No MED150
Fuel Type Oil
Fuel Consumption (l/h) 6.37
External Dimensions, Length (mm) 700
External Dimensions, Width (mm) 900
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 350 X 450
Internal Dimensions, Length (mm) 430
Internal Dimensions, Width (mm) 430
Internal Dimensions, Height (mm) 800
Chamber Volume (m3) 0.22
Timer (h) 0-24



BURN-RITE’S MED240 is an incinerator specifically designed to suit the need to incinerate medical waste at the point of source. This compact machine was designed due to the increased demand for hygienic on site medical waste incineration.
The MED RANGE has a number of common features: Virtually smoke and odour free. Rapid warm up to operating temperature. Simple to use.
2 options are available to suit every application of
medical waste incineration ( type 4).


FEATURES
5mm Steel Construction
2 Options Available
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control

Model No MED 240
Fuel Type Oil
Fuel Consumption (l/h) 6.37
External Dimensions, Length (mm) 1660
External Dimensions, Width (mm) 1250
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 550 X 750
Internal Dimensions, Length (mm) 1000
Internal Dimensions, Width (mm) 550
Internal Dimensions, Height (mm) 640
Chamber Volume (m3) 0.35
Timer (h) 0-24



Incineration Combustion Equipment
Medical Waste Incinerator Range Guide
range of medical waste incinerators are specifically designed to suit the needs of the disposal of all types of medical waste. This versatile range of incinerators was recently designed due to demand for this type of small batch loaded product.
With the added advantage of virtually no smoke or smell problems. However, Burn-Rite are able to provide hot gas filtration, particulate scrubbing and mobile options if this is required.
Long trouble free life is due to the robust design of all the models in the range. The latest range ensures strength of design and reliability.




General Waste Incinerator Range Guide January 2012



BURN-RITE Limited , New Lane, Crossens, Southport, PR9 8LN


t: +44 (0) 1704 224756 e: info@burn-rite.com w: www.burn-rite.com

BURN-RITE’S GW240 is an incinerator specifically designed to suit the need to incinerate waste at the point of source. This compact machine was designed due to the increased demand for hygienic on site waste incineration.
The GW RANGE has a number of common features: Virtually Smoke and odour free. Rapid warm up to operating temperature. Simple to use.
3 options are available to suit every application of
waste incineration ( type 1.2 & 3).





FEATURES
5mm Steel Construction
3 Options Available
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control


Model No GW 240
Fuel Type Oil
Fuel Consumption (l/h) 6.37
External Dimensions, Length (mm) 1660
External Dimensions, Width (mm) 1250
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 550 X 750
Internal Dimensions, Length (mm) 1000
Internal Dimensions, Width (mm) 550
Internal Dimensions, Height (mm) 640
Chamber Volume (m3) 0.35
Timer (h) 0-24






BURN-RITE’S GW350 is an incinerator specifically designed to suit the need to incinerate waste at the point of source. This compact machine was designed due to the increased demand for hygienic on site waste incineration.
The GW RANGE has a number of common features: Virtually Smoke and odour free. Rapid warm up to operating temperature. Simple to use.
3 options are available to suit every application of
waste incineration ( type 1.2 & 3).

FEATURES
5mm Steel Construction
3 Options Available
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control
24hr Burner Exchange Service


Model No GW 350
Fuel Type Oil
Fuel Consumption (l/h) 6.37
External Dimensions, Length (mm) 2300
External Dimensions, Width (mm) 1500
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 550 X 1100
Internal Dimensions, Length (mm) 1300
Internal Dimensions, Width (mm) 550
Internal Dimensions, Height (mm) 650
Chamber Volume (m3) 0.46
Timer (h) 0-24





BURN-RITE’S GW450 is an incinerator specifically designed to suit the need to incinerate waste at the point of source. This compact machine was designed due to the increased demand for hygienic on site waste incineration.
The GW RANGE has a number of common features: Virtually smoke and odour free. Rapid warm up to operating temperature. Simple to use.
3 options are available to suit every application of
waste incineration ( type 1,2 & 3).





FEATURES
5mm Steel Construction
3 Options Available
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control
24hr Burner Exchange Service


Model No GW 450
Fuel Type Oil
Fuel Consumption (l/h) 6.37
External Dimensions, Length (mm) 3110
External Dimensions, Width (mm) 1500
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 550 X 1800
Internal Dimensions, Length (mm) 2100
Internal Dimensions, Width (mm) 550
Internal Dimensions, Height (mm) 640
Chamber Volume (m3) 0.68
Timer (h) 0-24





BURN-RITE’S GW750 is an incinerator specifically designed to suit the need to incinerate waste at the point of source. This compact machine was designed due to the increased demand for hygienic on site waste incineration.
The GW RANGE has a number of common features: Virtually smoke and odour free. Rapid warm up to operating temperature. Simple to use.
3 options are available to suit every application of
waste incineration ( type 1.2 & 3).

FEATURES
5mm Steel Construction
3 Options Available
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control



Model No GW 750
Fuel Type Oil
Fuel Consumption (l/h) 6.37
External Dimensions, Length (mm) 3110
External Dimensions, Width (mm) 1800
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 700X2000
Internal Dimensions, Length (mm) 2100
Internal Dimensions, Width (mm) 700
Internal Dimensions, Height (mm) 800
Chamber Volume (m3) 1.13
Timer (h) 0-24



designed to suit the need to incinerate waste at the
point of source. This compact machine was designed
due to the increased demand for hygienic on site
waste incineration.

The GW RANGE has a number of common features: Virtually Smoke and odour free. Rapid warm up to operating temperature. Simple to use.
3 options are available to suit every application of
waste incineration ( type 1.2 & 3).

FEATURES
5mm Steel Construction
3 Options Available
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control
24hr Burner Exchange Service


Model No GW 1200
Fuel Type Oil
Fuel Consumption (l/h) 11.4
External Dimensions, Length (mm) 3110
External Dimensions, Width (mm) 2500
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 1000X2100
Internal Dimensions, Length (mm) 2200
Internal Dimensions, Width (mm) 1000
Internal Dimensions, Height (mm) 800
Chamber Volume (m3) 1.13
Timer (h) 0-24




designed to suit the need to incinerate waste at the
point of source. This compact machine was designed
due to the increased demand for hygienic on site
waste incineration.

The GW RANGE has a number of common features: Virtually Smoke and odour free. Rapid warm up to operating temperature. Simple to use.
3 options are available to suit every application of
waste incineration ( type 1.2 & 3).

FEATURES
5mm Steel Construction
3 Options Available
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control
24hr Burner Exchange Service


Model No GW 1800
Fuel Type Oil
Fuel Consumption (l/h) 11.4
External Dimensions, Length (mm) 3600
External Dimensions, Width (mm) 1900
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 1000X2700
Internal Dimensions, Length (mm) 2800
Internal Dimensions, Width (mm) 1000
Internal Dimensions, Height (mm) 800
Chamber Volume (m3) 2.24
Timer (h) 0-24



Incineration Combustion Equipment


General Waste Incinerator Range Guide
BURN-RITE’S range of general waste incinerators are specifically designed to suit the needs of the disposal of all types of general waste. This versatile range of incinerators was recently designed due to demand for this type of small batch loaded product.
With the added advantage of virtually no smoke or smell problems. However, burn-rite are able to provide hot gas filtration, particulate scrubbing and mobile options if this is required.
Long trouble free life is due to the robust design of all the models in the range. The latest range ensures strength of design and reliability.

• • • • • • • • • • •
• • • •




General Waste Incinerator Range Guide January 2012



BURN-RITE Limited , New Lane, Crossens, Southport, PR9 8LN


t: +44 (0) 1704 224756 e: info@burn-rite.com w: www.burn-rite.com




BURN-RITE’S MB100 is an incinerator specifically designed to suit the needs of the small poultry farmer. This compact machine was designed due to the increased demand from these farmers.
The MB RANGE has a number of common features:

Virtually Smoke and odour free.
Rapid warm up to operating temperature.
Simple to use.
Compliance with ABPR 1069/2009.

Typical users are:
Small Poultry Units


FEATURES
5mm Steel Construction
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control
24hr Burner Exchange Service

Model No
Fuel Type Oil
Fuel Consumption (l/h) 6.30
External Dimensions, Length (mm) 1400
External Dimensions, Width (mm) 1110
External Dimensions, Height (mm) including flue 2600
Door Opening l x h, (mm) 360 x 380
Internal Dimensions, Length (mm) 800
Internal Dimensions, Width (mm) 400
Internal Dimensions, Height (mm) 500
Chamber Volume (m3) 0.15
Timer (h) 0-24







BURN-RITE’S MB150 is an incinerator specifically designed to suit the needs of the small poultry farmer. This compact machine was designed due to the increased demand from these farmers.
The MB RANGE has a number of common features:

Virtually Smoke and odour free.
Rapid warm up to operating temperature.
Simple to use.
Compliance with ABPR 1069/2009.

Typical users are:
Small Poultry Units


FEATURES
5mm Steel Construction
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control
24hr Burner Exchange Service

Model No MB 150
Fuel Type Oil
Fuel Consumption (l/h) 6.37
External Dimensions, Length (mm) 700
External Dimensions, Width (mm) 900
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 350 X 450
Internal Dimensions, Length (mm) 430
Internal Dimensions, Width (mm) 430
Internal Dimensions, Height (mm) 800
Chamber Volume (m3) 0.22
Timer (h) 0-24






BURN-RITE’S MB240 is an incinerator specifically designed to suit the needs of the livestock farmer. This compact machine was designed due to the increased demand from these farmers.
The MB RANGE has a number of common features:

Virtually Smoke and odour free.
Rapid warm up to operating temperature.
Simple to use.
Compliance with ABPR 1069/2009.

Typical users are:
Poultry Units
Dairy Units
Pig Farms
Sheep Farms
Fish Farms


FEATURES
5mm Steel Construction
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control

Model No MB 240
Fuel Type Oil
Fuel Consumption (l/h) 6.37
External Dimensions, Length (mm) 1660
External Dimensions, Width (mm) 1250
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 550 X 750
Internal Dimensions, Length (mm) 1000
Internal Dimensions, Width (mm) 550
Internal Dimensions, Height (mm) 640
Chamber Volume (m3) 0.35
Timer (h) 0-24







BURN-RITE’S MB240F is an incinerator specifically designed to suit the needs of the livestock farmer. This compact machine was designed due to the increased demand from these farmers.
The MB RANGE has a number of common features:

Virtually Smoke and odour free.
Rapid warm up to operating temperature.
Simple to use.
Compliance with ABPR 1069/2009.

Typical users are:
Poultry Units
Dairy Units
Pig Farms
Sheep Farms
Fish Farms

FEATURES
5mm Steel Construction
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control

Model No MB 240
Fuel Type Oil
Fuel Consumption (l/h) 6.37
External Dimensions, Length (mm) 1660
External Dimensions, Width (mm) 1250
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 550 X 750
Internal Dimensions, Length (mm) 1000
Internal Dimensions, Width (mm) 550
Internal Dimensions, Height (mm) 640
Chamber Volume (m3) 0.35
Timer (h) 0-24







BURN-RITE’S MB350 is an incinerator specifically designed to suit the needs of the livestock farmer.

This compact machine was designed due to the
increased demand from these farmers.




The MB RANGE has a number of common features:

Virtually Smoke and odour free.
Rapid warm up to operating temperature.
Simple to use.
Compliance with ABPR 1069/2009.

Typical users are:
Poultry Units
Dairy Units
Pig Farms
Sheep Farms
Pet Crematorium

FEATURES
5mm Steel Construction
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control

Model No MB 350
Fuel Type Oil
Fuel Consumption (l/h) 6.37
External Dimensions, Length (mm) 2300
External Dimensions, Width (mm) 1500
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 550 X 1100
Internal Dimensions, Length (mm) 1300
Internal Dimensions, Width (mm) 550
Internal Dimensions, Height (mm) 650
Chamber Volume (m3) 0.46
Timer (h) 0-24





BURN-RITE’S MB450 is an incinerator specifically designed to suit the needs of the livestock farmer. This compact machine was designed due to the increased demand from these farmers.
The MB RANGE has a number of common features:

Virtually Smoke and odour free.
Rapid warm up to operating temperature.
Simple to use.
Compliance with ABPR 1069/2009.

Typical users are:
Poultry Units
Dairy Units
Pig Farms
Sheep Farms
Pet Crematorium

FEATURES
5mm Steel Construction
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control


Model No MB 450
Fuel Type Oil
Fuel Consumption (l/h) 6.37
External Dimensions, Length (mm) 3110
External Dimensions, Width (mm) 1500
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 550 X 1800
Internal Dimensions, Length (mm) 2100
Internal Dimensions, Width (mm) 550
Internal Dimensions, Height (mm) 640
Chamber Volume (m3) 0.68
Timer (h) 0-24





BURN-RITE’S MB450C is an incinerator specifically designed to suit the needs of the livestock farmer. This compact machine was designed due to the increased demand from these farmers.

The MB RANGE has a number of common features:
Virtually Smoke and odour free.
Rapid warm up to operating temperature.
Simple to use.
Compliance with ABPR 1069/2009.

Typical users are:
Poultry Units
Dairy Units
Pig Farms
Sheep Farms

FEATURES
5mm Steel Construction
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control


Model No MB 450C
Fuel Type Oil
Fuel Consumption (l/h) 6.37
External Dimensions, Length (mm) 2300
External Dimensions, Width (mm) 1800
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 700X1100
Internal Dimensions, Length (mm) 1300
Internal Dimensions, Width (mm) 700
Internal Dimensions, Height (mm) 800
Chamber Volume (m3) 0.73
Timer (h) 0-24





BURN-RITE’S MB750 is an incinerator specifically designed to suit the needs of the livestock farmer. This compact machine was designed due to the increased demand from these farmers.

The MB RANGE has a number of common features:
Virtually Smoke and odour free.
Rapid warm up to operating temperature.
Simple to use.
Compliance with ABPR 1069/2009.

Typical users are:
Poultry Units





Dairy Units Pig Farms Sheep Farms Pet Crematorium
FEATURES
5mm Steel Construction
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control
24hr Burner Exchange Service

Model No MB 750
Fuel Type Oil
Fuel Consumption (l/h) 6.37
External Dimensions, Length (mm) 3110
External Dimensions, Width (mm) 1800
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 700X2000
Internal Dimensions, Length (mm) 2100
Internal Dimensions, Width (mm) 700
Internal Dimensions, Height (mm) 800
Chamber Volume (m3) 1.13
Timer (h) 0-24




BURN-RITE’S MB1200 is an incinerator specifically

designed to suit the needs of the livestock farmer. This
compact machine was designed due to the increased
demand from these farmers.

The MB RANGE has a number of common features:

Virtually Smoke and odour free.
Rapid warm up to operating temperature.
Simple to use.
Compliance with ABPR 1069/2009.

Typical users are:
Poultry Units
Dairy Units
Pig Farms
Sheep Farms
Pet Crematorium

FEATURES
5mm Steel Construction
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control

Model No MB 1200
Fuel Type Oil
Fuel Consumption (l/h) 11.4
External Dimensions, Length (mm) 3110
External Dimensions, Width (mm) 2500
External Dimensions, Height (mm) including flue 3300
Door Opening l x h, (mm) 1000X2100
Internal Dimensions, Length (mm) 2200
Internal Dimensions, Width (mm) 1000
Internal Dimensions, Height (mm) 800
Chamber Volume (m3) 1.13
Timer (h) 0-24



Animal By-Products Incinerator Range

BURN-RITE’S range of animal by-products incinerators are specifically designed to suit the needs of the disposal of all types of general waste. This versatile range of incinerators was recently designed due to demand for this type of small batch loaded product.
With the added advantage of virtually no smoke or smell problems. The range is simple to operate and to own.
Long trouble free life is due to the robust design of all the models in the range. The latest range ensures strength of design and reliability.




• • • • • • • • • • •
• • • •

Animal By-Products Incinerator Range January 2012



BURN-RITE’S MED100 is an incinerator specifically designed to suit the need to incinerate medical waste at the point of source. This compact machine was designed due to the increased demand for hygienic on site medical waste incineration.
The MED RANGE has a number of common features: Virtually smoke and odour free. Rapid warm up to operating temperature. Simple to use.
2 options are available to suit every application of
medical waste incineration ( type 4).





FEATURES
2 Options Available
25mm High Density Insulation
75mm High Quality Refractory Lining
Designed for Outdoor Use
IP68 Rated
Factory Wired
Factory Installed Pipework
Factory Test Fired
10 M Pipe For On Site Install
2 Stage Burners
Individual Chamber Temperature Control
Pre Incineration Warm Up Cycle
Post Incineration Cool Down Cycle
Variable Time Control
24hr Burner Exchange Service

Model No MED 100
Fuel Type Oil
Fuel Consumption (l/h) 6.30
External Dimensions, Length (mm) 1400
External Dimensions, Width (mm) 1110
External Dimensions, Height (mm) including flue 2600
Door Opening l x h, (mm) 360 x 380
Internal Dimensions, Length (mm) 800
Internal Dimensions, Width (mm) 400
Internal Dimensions, Height (mm) 500
Chamber Volume (m3) 0.15
Timer (h) 0-24