Medical Waste Incinerators | Animal Crematory | Phone: +86-25-8461 0201 | Email: cloverincinerator@gmail.com
| Home | What is Incinerator | Incinerator Knowledge | Friendly Links |
|
Principle of the Incinerator
equipment is incineration/combustion/burn. Generally, the
function is waste treatment for Solid waste, Liquid waste, Gas
waste, etc.
The main body is one combustion chamber (at least), Refractory line or firebrick, Insulation materials and the outer plate. Ignition element is external oil or gas burner. The burner can be running until waste burnout but for some waste like plastic, paper (sometime, mix coal with waste before feeding), they can combustion itself after Ignition. During combustion, burner has a fan itself for Oxygen supply and also protect burner avoid heat damage from combustion chamber. And, there a external fan blow air into combustion chamber. The Exhaust gas blow out after combustion. Considering Environmental Protection requirements and rules, almost all incinerator have secondary combustion chamber (after-burn, post-combustion), even if third combustion chamber. The secondary burner burn the Exhaust gas from primary combustion chamber, this technology make sure sufficient combustion, few black smoke and smell. The updated incinerator technology focus on Exhaust gas treatment to remove Hazardous material and other function from incinerator, like heat recovery (waste to energy), save fuel cost, PLC Automation operation. In some Developed countries, some new waste treatment method like High-temperature cooking, waste carbonization, crushing sterilization technology is instead of incineration technology. |
 |
YD model incinerator is latest design for waste treatment, include medical waste, animal cremation and other solid waste. This equipment quality structural for kinds of site, like hospital, environmental department, animal cremation agencies, etc. CLOVER Incinerator supply updated models with dual combustion chamber, mix-combustion chamber and smoke filter chamber with refractory lines, and the combustion chamber temperature up to 1200 deg C. |
|
Item |
Specification |
|
Model |
YD-15C，YD-20C, YD-30C, YD-30, YD-50，YD-100, YD-150, YD-300, YD-500 |
|
Main Product List |
Double Combustion Chamber |
|
Mix-Combustion Chamber |
|
|
Smoke Filter Chamber |
|
|
PLC Control Case |
|
|
Chimney |
|
|
Italy oil/gas burner: 02 units |
|
|
Oil Tank (if oil fuel) |
|
Technical Spec. |
YD-15C |
YD-20C |
YD-30C |
YD-30 |
|
Burning Rate (kgs/Hour) |
15 kgs/Hr. |
20 kgs/Hr. |
30 kgs/Hr. |
30 kgs/Hr. |
|
Feed Capacity (kgs) |
40-80 kgs |
40-80 kgs |
50-100 kgs |
60-120 kgs |
|
Equipment Weight |
1200 kgs |
1200 kgs |
1800 kgs |
2300 kgs |
|
Equipment Technical Specifications |
||||
|
Primary Chamber (Liters) |
200 |
200 |
250 |
360 |
|
Secondary Chamber (Liters) |
140 |
140 |
140 |
200 |
|
External Dimensions (cm) |
170x140x160 |
170x140x160 |
170x140x190 |
145x90x175 |
|
Internal Dimensions (cm) |
55x55x65 |
55x55x65 |
55x55x85 |
100x60x60 |
|
Oil Tank(Liters) |
50 |
100 |
100 |
200 |
|
Door Opening (cm) |
38 x 48 |
38 x 48 |
38 x 48 |
48 x 60 |
|
Chimney (M) |
5.0 |
5.0 |
5.0 |
5.0 |
|
Secondary Chamber |
YES |
YES |
YES |
YES |
|
Mix-Combustion Chamber |
YES |
YES |
YES |
YES |
|
Smoke Filter Chamber |
YES |
YES |
YES |
YES |
|
Combustion Fuel |
Oil/Gas |
Oil/Gas |
Oil/Gas |
Oil/Gas |
|
Operation Technical Specifications |
||||
|
Residency Time |
2.0 Sec. |
2.0 Sec. |
2.0 Sec. |
2.0 Sec. |
|
Temperature Monitoring |
YES |
YES |
YES |
YES |
|
Constant Run Fan |
YES |
YES |
YES |
YES |
|
Operation Temperature |
8000C -12000C |
8000C -12000C |
8000C -12000C |
8000C -12000C |
|
Technical Spec. |
YD-50 |
YD-100 |
YD-150 |
YD-300 |
YD-500 |
|
Burning Rate (kgs/Hour) |
50 kgs/Hr. |
100 kgs/Hr. |
150 kgs/Hr. |
300 kgs/Hr. |
500 kgs/Hr. |
|
Feed Capacity (kgs) |
150-350 kgs |
200-400 kgs |
300-600 kgs |
600-1200 kgs |
1000-2000 kgs |
|
Equipment Weight |
4000 kgs |
4300 kgs |
7000 kgs |
8300 kgs |
13000 kgs |
|
Equipment Technical Specifications |
|||||
|
Primary Chamber (Liters) |
900 |
1200 |
1500 |
2400 |
4000 |
|
Secondary Chamber (Liters) |
200 |
500 |
500 |
1200 |
1500 |
|
External Dimensions (cm) |
200x160x230 |
220x180x360 |
240x170x380 |
260x220x420 |
320x220x460 |
|
Internal Dimensions (cm) |
120x90x85 |
130x100x90 |
150x100x96 |
220x110x100 |
257x147x108 |
|
Oil Tank(Liters) |
300 |
300 |
500 |
500 |
500 |
|
Door Opening (cm) |
62 x 80 |
55 x 80 |
59 x 81 |
90 x 110 |
108 x 128 |
|
Chimney (M) |
5.0 |
10.0 |
10.0 |
10.0 |
14.0 |
|
Secondary Chamber |
YES |
YES |
YES |
YES |
YES |
|
Mix-Combustion Chamber |
YES |
YES |
YES |
YES |
YES |
|
Smoke Filter Chamber |
YES |
YES |
YES |
YES |
YES |
|
Combustion Fuel |
Oil/Gas |
Oil/Gas |
Oil/Gas |
Oil/Gas |
Oil/Gas |
|
Operation Technical Specifications |
|||||
|
Residency Time |
2.0 Sec. |
2.0 Sec. |
2.0 Sec. |
2.0 Sec. |
2.0 Sec. |
|
Temperature Monitoring |
YES |
YES |
YES |
YES |
YES |
|
Constant Run Fan |
YES |
YES |
YES |
YES |
YES |
|
Operation Temperature |
8000C -12000C |
8000C -12000C |
8000C -12000C |
8000C -12000C |
8000C -12000C |
YD Model incinerators, burning rate from 30-500kgs per hour. Heavy duty combustion chamber and up to 500kgs per hour capacity.
PLC Control Case, pre-setup, easy installation and operation.
Heavy Duty Incinerator waste feed door, safe and negative pressure operation in combustion chamber.
Smoke Filter Chamber with filter brick , Virtually smoke and smell free after burning.
Supply large scale incinerators, burning rate up to 500kgs per hour and 6 ton per day.
Oil & gas burner original from Italy, quality reliable.
User Guide for customers
Gas Fired Incinerator,Hospital Medical Waste Incinerator,Incinerators for Medical Waste Disposal,Industrial Incinerator,
Medical Incinerators Capacity Calculations,Msw Incinerator Msw1000,Poultry Incinerator,Small Medical Waste Incinerator,
Temperature Control Incinerator,Diesel and Gas Incinerator 50 Kg Per Hour