incinerator specifically designed

Information from Internet, Just as the industry knowledge, for readers, no commercial use. The copyright belongs to the original owner. We will delete if not agree.

DOUBLE CHAMBERCYCLONATOR INCINERATOR



Designed to be used in Permanent Locations for Types I, II, & III Wastes


Capacity
.6 m3, 64 kg per hour Type No. 1, 2, & 3 waste.
Power Requirements
115 volts 60 cycle single phase
Stack
Stainless Steel - 14 gauge
- 33 cm diameter
-3 m high
- c/w stainless steel spark arrester
Casing
12 gauge steel Lining: high heat duty castable refractory Over high temperature insulation.
Hearth
Refractory hearth over 6.35 mm steel base.
Doors
6.35 mm steel plate c/w heavy duty blade latch. Charging: - 46 cm x 61 cm clear opening
- Refractory lined over steel plate
Ash: - 46 cm x 30 cm clear opening
- Refractory lined over steel plate
Air Supply - Adjustable
Forced air fan c/w ducts to primary air jets and to secondary over-fire air jets.
Timers - Adjustable
Cycle timers interconnected to air supply fan and gun type burners enclosed in burner housings.
Burners
455,000 BTU, gun type Primary burner. Gun burner enclosed in protective plate steel housing. 325,000 BTU in secondary chamber.
Fuel Supply: Oil Fired Unit Only
1350 liter fuel storage tank c/w filter and Flexible hose type connection.
Transporter
Incinerator mounted on skid type frame
1.8 m long x 1.5 m wide.
Height
3.9 m tall, with stack folded. Constructed of W150 I Beam c/w bumper posts.
Weight
3000 kg. (6613 Lbs.)
Options
* LPG Fired burners
* Diesel Fired burners
* 2.3 m Electric power cord
* Temp. controllers in Primary and Secondary chambers.



NOTE: Some waste streams may require the use of waste gas scrubbers.
MANUFACTURED BY: DISTRIBUTED BY: