It should be a three chambered incinerator The load capacity of 250 kg The housing for the incinerator should be able to withstand the temperatures and other operational requirements. The chimney should have a strong refractory lining of special type of cement to withstand temperatures more than 1200oc. It should have a strong base for […]
A PYROLYTIC MEDICAL WASTE INCINERATOR FOR REMERA-MBOGO DISTRICT HOSPITAL An incinerator represents a complete solution to the problem of disposal of all hospital waste types. The liquid fuel is diesel. The incinerator should meet the environment standards. The final destination of this equipment is Remera-Mbogo Special Health Center in RULINDO District; bidders are requested to […]
Incinerator 20 Kg Incinerator electrically operated including: A cage for receipt of biomedical waste; A combustion chamber with fireplace with a filter to retain ashes; A cover; An air supply; A turbine allowing supply air. Combustion temperature: 1800 ° C. Comes with all accessories. ▪ The incinerator should be […]
Incinerator to have double combustion chamber and control amount of dioxin and other gasses emitted without being harmful. Estimated dimensions, to manufacturers standard, but to be compact as possible. capacity: approximately 60kg per day, voltage: 220V and diesel fired. CSH Hospital, (Calabar, Nigeria) Mmedical waste incinerator capable of disposing up to 0.5 cubic meter of […]
incinerator suppliers.7) Burn rate: 15 – 20 Kg/h 8) Capacity: not less than 130 L 9) Concentrations of most pollutants in stack gases below detection limits 10) Diesel fuel 11) Electronic system control 12) Easy to operate and minimal training 13) Any accessory or dedicated device necessary to the proper functioning and utilization of the […]